Discussion forum related to MMI navigation systems for A6 / A8 / Q7 models. Audi A3 8v 2017 - how to update MMI software? Audi 3G+ 2012 / 2013 A4. Audi A6 C7 MMI Navigation plus MMI touch (4G) In order to update your GPS device: Audi A6 C7 MMI Navigation plus MMI touch (4G) with the latest update, follow next instructions. First of all, be sure you got the update file for your Audi A6 C7 MMI Navigation plus MMI touch (4G) device, downloaded from SpeedcamUpdates.com.
- The 2012 Audi A6 has 73 problems & defects reported by A6 owners. The worst complaints are transmission, cooling system problems.
- An overview of Audi MMI® The Audi MMI® (Multi Media Interface) system was created to streamline the controls for audio, vehicle settings, and available navigation under a common interface, thereby reducing the number of buttons for a cleaner interior appearance.
Audi A6 in New Jersey, United States Nov 2012 - Dec 2015 | |
Dec 2012 22000 mi | Final drive of CVT was defective and the entire CVT was replaced under warranty. Symptoms included grinding noise when steering wheel was held off center(variable degrees) and card allowed to move slowly, the noise could be heard. Sunroof inoperative. Switch defective. |
May 2013 30900 mi | Water leak into the interior of the car, past the seals around the front door speakers. Water that gets past the glass window bottom seal would go into the door and then leak past the speaker seal, into the interior of the car. |
Feb 2014 45600 mi US $50 | Fuel filler door failed to open. Had to replace the fuel filler flap actuator with a revised part. Bought the part myself and replaced it based on instructions obtained online. Problem has since been resolved. |
Audi A6 in Arkansas, United States Feb 2016 - Dec 2016 | |
Apr 2016 79200 mi US $345 | Mmi and nav update and upgrade pcv. Programmed a key |
Audi A6 in Florida, United States May 2014 - Jun 2018 | |
Jun 2015 32000 mi | AC not blowing cold at all. Malfunction of AC pressure switch G395. TSB# 2020124/12. Replaced with revised part 4H0-959-126-A |
Jan 2016 40300 mi | The diaphragm in the crankcase pressure regulating valve that was replaced last time was not sealing properly, causing hard start, rough idle, almost stalling, MIL. Entire valve replaced. |
Audi A6 in California, United States Feb 2013 - Jun 2016 | |
Nov 2014 29700 mi | Breather valve(pressure regulating valve) was not working right, removed and reinstalled |
Jul 2015 36300 mi | Sunroof wouldn't close Windshield washer nozzle inoperative AC was blowing hot air; AC pressure/temperature switch replaced |
Audi A6 Mmi Not Working
In order to update your GPS device: Audi A6 C7 MMI Navigation plus MMI touch (4G) with the latest update, follow next instructions.
First of all, be sure you got the update file for your Audi A6 C7 MMI Navigation plus MMI touch (4G) device, downloaded from SpeedcamUpdates.com.
If still haven't got it, you can get it now filling the form you see on this page.
- Extract files from the SpeedcamUpdates zip package. If the file you have downloaded is not a ZIP file means the file is already decompressed, and you can continue with the next step of this installation instructions.
Depending on the device version you will have to follow the installation method 1 or method 2. If you're not sure, please try first method 1, then method 2.
- Put an empty SD card into the PC card reader.
- Unzip the file downloaded from our website into the SD card
- Insert the SD card into the card reader of the Audi A6 C7 MMI Navigation plus MMI touch (4G) GPS device.
Method 1
- Click on MENU option. Then click 'Setup' on the control button.
- Select the option for 'system update'
- Select the storage medium on which the data is stored.
Method 2
- Select navigation menu
- Select special destinations
- Select special destinations MyAudi
- Select: Import special destinations MyAudi
- Select: Import from SD card
- Follow next on screen steps to finish the import procedure. Once import procedure finished you can customize your notification setup following next steps.
- Select MAP Settings. Select Map Contents (MMI)
- Select myAudi Special Destinations
- Check all the categories you want to be shown in the map.
- Select navigation setup
- Select show warning and enable warning tone when approaching to the speed camera
- Select maximum 10 categories you want to be warned
Depending on the firmware version that is installed on your device, it could be possible you can not hear alerts with sound when approaching to the speed camera. If your firmware is capable to warn you playing a sound, you can enable this feature in the points of interest setup. You can enable this feature checking that item in the items list of the map. If you can not find it you then will have to look to your reference manual. Can be located in different places depending on the firmware release.
Remember you can customize freely your download. Get access to the customer control panel and using the customization tool in order to get a customized speedcam database according to your needs. You will need this tool if your device doesn't accept the size of the new update. You can add and remove countries speedcam data to your current setup.
Discussion forum related to MMI navigation systems for A6 / A8 / Q7 models. Audi A3 8v 2017 - how to update MMI software? Audi 3G+ 2012 / 2013 A4. Audi A6 C7 MMI Navigation plus MMI touch (4G) In order to update your GPS device: Audi A6 C7 MMI Navigation plus MMI touch (4G) with the latest update, follow next instructions. First of all, be sure you got the update file for your Audi A6 C7 MMI Navigation plus MMI touch (4G) device, downloaded from SpeedcamUpdates.com.
- The 2012 Audi A6 has 73 problems & defects reported by A6 owners. The worst complaints are transmission, cooling system problems.
- An overview of Audi MMI® The Audi MMI® (Multi Media Interface) system was created to streamline the controls for audio, vehicle settings, and available navigation under a common interface, thereby reducing the number of buttons for a cleaner interior appearance.
Audi A6 in New Jersey, United States Nov 2012 - Dec 2015 | |
Dec 2012 22000 mi | Final drive of CVT was defective and the entire CVT was replaced under warranty. Symptoms included grinding noise when steering wheel was held off center(variable degrees) and card allowed to move slowly, the noise could be heard. Sunroof inoperative. Switch defective. |
May 2013 30900 mi | Water leak into the interior of the car, past the seals around the front door speakers. Water that gets past the glass window bottom seal would go into the door and then leak past the speaker seal, into the interior of the car. |
Feb 2014 45600 mi US $50 | Fuel filler door failed to open. Had to replace the fuel filler flap actuator with a revised part. Bought the part myself and replaced it based on instructions obtained online. Problem has since been resolved. |
Audi A6 in Arkansas, United States Feb 2016 - Dec 2016 | |
Apr 2016 79200 mi US $345 | Mmi and nav update and upgrade pcv. Programmed a key |
Audi A6 in Florida, United States May 2014 - Jun 2018 | |
Jun 2015 32000 mi | AC not blowing cold at all. Malfunction of AC pressure switch G395. TSB# 2020124/12. Replaced with revised part 4H0-959-126-A |
Jan 2016 40300 mi | The diaphragm in the crankcase pressure regulating valve that was replaced last time was not sealing properly, causing hard start, rough idle, almost stalling, MIL. Entire valve replaced. |
Audi A6 in California, United States Feb 2013 - Jun 2016 | |
Nov 2014 29700 mi | Breather valve(pressure regulating valve) was not working right, removed and reinstalled |
Jul 2015 36300 mi | Sunroof wouldn't close Windshield washer nozzle inoperative AC was blowing hot air; AC pressure/temperature switch replaced |
Audi A6 Mmi Not Working
In order to update your GPS device: Audi A6 C7 MMI Navigation plus MMI touch (4G) with the latest update, follow next instructions.
First of all, be sure you got the update file for your Audi A6 C7 MMI Navigation plus MMI touch (4G) device, downloaded from SpeedcamUpdates.com.
If still haven't got it, you can get it now filling the form you see on this page.
- Extract files from the SpeedcamUpdates zip package. If the file you have downloaded is not a ZIP file means the file is already decompressed, and you can continue with the next step of this installation instructions.
Depending on the device version you will have to follow the installation method 1 or method 2. If you're not sure, please try first method 1, then method 2.
- Put an empty SD card into the PC card reader.
- Unzip the file downloaded from our website into the SD card
- Insert the SD card into the card reader of the Audi A6 C7 MMI Navigation plus MMI touch (4G) GPS device.
Method 1
- Click on MENU option. Then click 'Setup' on the control button.
- Select the option for 'system update'
- Select the storage medium on which the data is stored.
Method 2
- Select navigation menu
- Select special destinations
- Select special destinations MyAudi
- Select: Import special destinations MyAudi
- Select: Import from SD card
- Follow next on screen steps to finish the import procedure. Once import procedure finished you can customize your notification setup following next steps.
- Select MAP Settings. Select Map Contents (MMI)
- Select myAudi Special Destinations
- Check all the categories you want to be shown in the map.
- Select navigation setup
- Select show warning and enable warning tone when approaching to the speed camera
- Select maximum 10 categories you want to be warned
Depending on the firmware version that is installed on your device, it could be possible you can not hear alerts with sound when approaching to the speed camera. If your firmware is capable to warn you playing a sound, you can enable this feature in the points of interest setup. You can enable this feature checking that item in the items list of the map. If you can not find it you then will have to look to your reference manual. Can be located in different places depending on the firmware release.
Remember you can customize freely your download. Get access to the customer control panel and using the customization tool in order to get a customized speedcam database according to your needs. You will need this tool if your device doesn't accept the size of the new update. You can add and remove countries speedcam data to your current setup.